Penerapan GMP Sebagai Peningkatan Mutu Produk pada UKM Pengolahan Makanan
DOI:
https://doi.org/10.62951/inovasisosial.v1i4.712Keywords:
GMP, Food SME, QualityAbstract
Good Manufacturing Practice (GMP) in the food industry is a requirement that must be met to produce products that are safe for consumers to consume, where such practices are implemented to prevent and reduce food contamination. Therefore, an understanding of GMP is needed to address the issues faced by SMEs, including the lack of assurance regarding food safety and quality. Issues regarding food safety and quality assurance are crucial for the food industry. Demands for food safety and quality continue to rise along with consumer demand. The purpose of this service is to provide understanding and implementation of GMP in the production department. The method used involves direct visits, discussions, guidance, and implementation of improvements related to GMP application in the production department. The results of the service obtained before this training from 11 participants were 8 SME participants who were unaware or had not heard of GMP. The results of questionnaire measurements regarding performance and expectations of 12 questions posed showed that some questions received higher performance scores compared to expectations, such as questions regarding the relevance of the service materials to community issues and the cohesion of the community service team. For the average results of each performance and expectation question, a performance score of 3.7 out of 4 was obtained for this service activity, and an expectation score of 3.8 out of 4 was obtained. This indicates that participants felt a high level of satisfaction with the performance and expectations of this GMP service activity.
References
Agustin, M. (2020). Penerapan Good Manufacturing Practices (GMP) pada usaha pembuatan bawang goreng (Studi kasus pada IKM Jakarta Pusat). Jurnal Kalibrasi - Karya Lintas Ilmu Bidang Rekayasa Arsitektur, Sipil, Industri, 3(1), 37–46. https://ejournal.borobudur.ac.id/index.php/teknik/article/view/640
Anisa, C., Putri, T., Soleha, E., Sandi, P. H., & Muarief, F. (2024). Optimalisasi kompetensi SDM serta inovasi produk dalam kegiatan pendampingan UMKM pada usaha makanan. Inovasi Sosial: Jurnal Pengabdian Masyarakat, 1(3), 19–23. https://doi.org/10.62951/inovasisosial.v1i3.388
Anshari, A., Wahyudin, W., & Herwanto, D. (2022). Penerapan Good Manufacturing Practices (GMP) pada pengendalian kualitas pangan produk nugget ayam tempe di UMKM Haiyuu Indonesia. Sitekin: Jurnal Sains, Teknologi dan Industri, 20(1), 138–146.
Badan POM. (2022). Laporan tahunan Loka POM di Kabupaten Bogor tahun 2022 (Issue July).
BSN. (2020). Pelatihan terkait GMP dan SSOP. In Direktorat Penerapan Standar dan Penilaian Kesesuaian. www.bsn.go.id
Hanidah, I., Mulyono, A. T., Andoyo, R., Mardawati, E., & Huda, S. (2019). Penerapan Good Manufacturing Practices pada produksi sistik ebi sebagai upaya peningkatan kualitas produk olahan ikan di pesisir Eretan - Indramayu. Agricore: Jurnal Agribisnis dan Sosial Ekonomi Pertanian Unpad, 3(1). https://doi.org/10.24198/agricore.v3i1.17585
Hapsari, Y. T., & Kurniawanti, K. (2022). Pendampingan penerapan Good Manufacturing Practice (GMP) pada usaha jamu. Jurnal Abdimas Madani dan Lestari (JAMALI), 04(September), 96–105. https://doi.org/10.20885/jamali.vol4.iss2.art6
Herdhiansyah, D., Gustina, G., Patadjai, A. B., & Asriani, A. (2021). Kajian penerapan Good Manufacturing Practices (GMP) pada pengolahan keripik pisang. Agrointek: Jurnal Teknologi Industri Pertanian, 15(3), 845–853. https://doi.org/10.21107/agrointek.v15i3.10037
Kemenperin. (2010). Permenperin No 75/M-IND/PER/7/2010 tentang pedoman cara produksi pangan olahan yang baik. Kementerian Perindustrian, 358, 1–26. www.djpp.depkumham.go.id
Konsultan, M. S. (2022). Good Manufacturing Practices (GMP).
Kurniasari, N. I., Yudiastuti, S. O. N., & Rezeqi, R. J. (2022). Analisis penerapan Good Manufacturing Practice (GMP) di CV. Buana Citra Sentosa, Yogyakarta. JOFE: Journal of Food Engineering, 1(3), 130–139. https://doi.org/10.25047/jofe.v1i3.3279
Juliana, N., & Megasari, W. O. (2021). Analisis kualitas tahu melalui penerapan Good Manufacturing Practices (GMP) industri rumah tangga UD. Sari Makmur Desa Wakobalu. Promotif: Jurnal Kesehatan Masyarakat, 11(2), 100–107. https://doi.org/10.56338/pjkm.v11i2.2021
Pristyanto, Y. D., Tranggono, T., & Fauziyah, N. A. (2022). Penguatan Good Manufacturing Practice (GMP) pada CV Pawon Ibun melalui kegiatan pelatihan hingga evaluasi dalam program matching fund. Selaparang: Jurnal Pengabdian Masyarakat Berkemajuan, 6(4), 1959. https://doi.org/10.31764/jpmb.v6i4.11450
Rudiyanto, H. (2016). The study of Good Manufacturing Practices (GMP) and good quality wingko based on SNI-01-4311-1996. Jurnal Kesehatan Lingkungan, 8(2), 148. https://doi.org/10.20473/jkl.v8i2.2016.148-157
Indriani, V., Apriantini, A., & Suryati, T. (2021). Penerapan GMP dan SSOP dalam proses produksi rendang daging di produsen Rendang Istana Rendang Jambak. Jurnal Ilmu Produksi dan Teknologi Hasil Peternakan, 9(3), 127–137. https://doi.org/10.29244/jipthp.9.3.127-137
Yanti, I., & Rahmadi, A. (2017). Kajian penerapan GMP, HACCP dan aspek kesiapan penerapan SNI. Prosiding Seminar Nasional Ke 1 Balai Riset dan Standardisasi Industri Samarinda, 118–124.
Zulhasmi. (2021). Penerapan Good Manufacturing Practice (GMP) sebagai strategi dalam peningkatan mutu dan keamanan produk olahan peternakan. Dinas Peternakan dan Kesehatan Hewan.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Inovasi Sosial : Jurnal Pengabdian Masyarakat
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
